Jensen Heavy Duty 3 Prong Tire Swivel – Commercial
This tire swivel has 3 prongs to help prevent chains from tangling. Our commercial tire swivel a rubber boot to prevent fingers from being pinched. The plate is 4 ½ ” x 2 15/16” with four 9/16” holes that are 3” x 1 9/16” center to center. It hangs down 8 1/2″ from pipe. Powder coated in a bright red finish. You can use the H140 – H150 or the H172 for this. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength 5000 lbs.
This is for children 2 – 12 years old only. Adults should supervise children at all times. Do not allow children to use unsafely. Do not allow it to be used if damaged.
Do the following to reduce the chance of serious injuries. At beginning and end of each play season and once a month during play season, check for rusty or worn chain. Carefully check hole around fasteners to look for wear. Check for vandalism. Check to make sure s hooks and/ or H-shackles are closed properly. Check spinning action and make sure there is no binding, and using a grease gun put a sufficient amount of standard grease into the swivel through the grease fitting. You will see the grease come out when it is full. We have used a McKay Molybdenum Disulfide grease cartridge, but any standard grease cartridge from any auto part store should be sufficient. There are two grease fittings that must be checked and filled with grease during maintenance. The first is at the bottom of the hanger in the swivel head and is easily seen and reached. The other grease fitting is harder to reach, and is located under the rubber boot on the universal joint. However, it is important that this grease fitting be checked also.
Items ship within 1-3 Business Days.